RPA

Guys, Does anyone in this community have an experience related to the plugin.net, whereas every time we reopen the wizard, the .net plugin fails to run? The error message shown was “Error”. How can we avoid the issue? Thanks before.

My question has two parts. I’ve been working on an issue with the Send Email function since March of 2024. Tech support has me in an endless loop of try this and send the logs. It works if I run the Wizard through the Studio but only when using a copy of the Studio folder on the local Desktop not the regular installation location of the Studio. But it does not work if I run the same Wizard with the Robot using a trigger. (The Wizard runs but the emails are not received.) Any ideas what could be causing this? This is the error in the log: {"@t":"2025-02-10T17:39:33.1116710Z","@mt":"The specified string is not in the form required for an e-mail address.","@l":"Error","EnvironmentUserName":"MYCOMPANY\\nintex","msg":"The specified string is not in the form required for an e-mail address.","add":{},"exc":{"Message":"The specified string is not in the form required for an e-mail address.","Data":[],"InnerException":null,"TargetSite":"Int32 ReadCfwsAndThrowIfIncomplete(System.String, Int32)",

If you are using Nintex RPA version 21.10.6 and below and you use the Kryon Connector Chrome extension for browser-based commands, the following may apply to you. Google began phasing out the Manifest V2 extensions platform in June 2024, in favor of the Manifest V3 platform with improved security, privacy, performance and trustworthiness of the extension ecosystem as a whole. However, enterprises using the Extension Manifest V2 Availability policy were exempt from any browser changes until June 2025. Currently there are three versions of the Connector extensions for RPA in Chrome. 1) Manifest V3 based Nintex Connector and Nintex Web Connector extensions - compatible with Nintex RPA v21.10.7 and above 2) Manifest V2 based Kryon Connector extension - compatible with Nintex RPA v21.10.6 and below On July 1, 2025, if you are using Nintex RPA version 21.10.6 and below and you use the Kryon Connector Chrome extension, you may realize operations interruptions. Nintex would like to remind all

I faced an issue: “Access is denied. Check credentials and try again” when trying to get an email message from M365 using “Get email message DAC”. This issue happened with the latest version of Nintex RPA 23.11.1. When I tested it with version 22.9.3 with the same configuration as the latest version (Dynamic Command version is 22.9.03.05.23), no error was found, and the messages could be retrieved. The different between Dynamic Commands 23.11.0.1 with 22.9.03.05.23, no server field exists like on IMAP or POP3. Is there any way to solve the issue? FYI, I did followed the step by steps Working with M365 Exchange Modern Authentication configuration (https://help.nintex.com/en-US/kryonrpa/23.11/Content/Console/WorkingwithMicrosoft365ExchangeModernAuthentication/Azure_Configuration_for_Modern_Authentication.htm?tocpath=Studio%7CCredentials%20Vault%7CWorking%20with%20Microsoft%20365%20Exchange%20Modern%20Authentication%7C_____1) Appreciate if anyone could have any input or suggestion to solv

Hi, I have two Nintex RPA development environments with the same versions, which are 24.4.2.5. I have created some RPA use cases in the first environment and want it to be replicated in the second environment. Then I exported and imported to the second environment using dwiz files. When I tried to import one use case, an error occurred with the following message, “Unsupported amount (2) of imported libraries!”. I have checked for those two environments and all have the same configurations including with its applications defined in the Nintex Admin. Has anyone had an experience like this? In the meantime, whenever I want to replicate the flow, I must use the import through the local wizard (save as a lwiz file). Thanks before for any input.

I am trying to find a way for several bots to work from the same shared Excel file. Assume there is a large list of data (Account Numbers) in one column and another column beside it called “RPA Status”. When one bot starts to work an account, it looks at the Excel file to find the first Account Number with an empty RPA Status field. It then copies this Account Number and writes “In Process” to the RPA Status field so that another bot will not pick up this Account Number. It writes back “Complete” once it has completed whatever process it is doing. Ideally, I’d like to have multiple machines pulling in and writing back to this Excel file. The issue is that if I try running another bot pulling from the same file, the Excel is in “Read Only” status until the other workflow is completely finished. Is there a way to write to an Excel file and immediately close out the connection so that another bot can write to it? I know SQL is an option, but that raises several other issues.

Hi, Does anyone know how to use the “Output Variables” in the Task Summary on the Nintex RPA Console Plus? Task Summary

Hi, Did anyone know where I can see all the activity about attended robots, e.g., robots and wizard status (successful running or not) and so on? In the Nintex Assistant, we could only see for the robot task queues Please CMIIW, Nintex Console Plus is a web-based orchestration and analysis tool for managing and controlling unattended robots, tasks and triggers. Meaning we could not see the dashboard for the attended robot.

I have a simple wizard where I need to copy four columns from excel and paste the values in fields of a web base application. My commands include: **Get worksheet (Excel worksheet actions DAC); Copy from Excel (range of cells into a variable); Get Array Data (using column delimiter, I am separating each column value into a variable, to later ‘input text’ in the application) My problem is when the command for Get Array Data pulls in the last column it also brings in the row delimiter and the value of the first column. The command reads like this: From the array stored in (my variable created from the Copy from Excel) Where items are delimited by $column delimiter$ Get the value of item #4 (since it is column 4). My row delimiter is ***. The value that is pulled in for the last column and stored in the variable reads something like this: 123456***123456789. It pulls in the data in the last column AND the data in the first column of the next row. Any help you have to offer with this would

I am pulling in several fields from excel and splitting the columns out to fields on a webpage. There is one of those split values that need to be pasted more than once - as in generating a password. What options do I have to get that value in two boxes. It will paste in the first cell, tab to the next cell but nothing happens. Eventually the wizard will move past that point.

I am working on a wizard that copies data from excel to a website, resulting in the return of a new account number that I need to paste back to the same excel document. Is that possible? When completed, I would have all the original excel data used to create the account and the column following that data would be the new account number.

I suspect we’re suffering from the issue described in this post by @MParris. The fix for this issue is found in version v23.11.2.1, but I’m only able to find the release notes for v23.11.2.5, which don’t seem to mention anything related to the described issue. (https://public.kryon.io/RPA-Versions/23.11/23.11_Latest/23.11.2/23.11.2%20Release%20Notes.txt) Can anyone point me in the right direction to find release notes for previous versions of the program, like v23.11.2.1? I’m hoping it’s not that we have to make a support case. Thank you!

Using RPA, I am trying to capture a 16 digit number from a program and paste it to excel. Either it will not copy it at all or it will copy it and change the last digit to 0. I have tried using the commands ‘get html object text’ and ‘get html object value’. Am I using the wrong command?

Check out our latest tutorial on the Split dynamic advanced command in Nintex RPA!Learn how to perform calculations on variables using constants or other variable values to enhance your wizards. What You Will Learn: How to use the Split Dynamic Advanced Command. Practical examples of variable splitting. Best practices for effective automation with this command. For more information on advanced commands check out our help center Join the Discussion: Share your thoughts and questions below!

I would like to move a wizard from the development Studio to the Production Console. How does that work? I have not been able to find any notes on a Production Studio. Would I have to export from the Dev Studio, then import to Prod Studio to be able to add the automated wizard to the Production Console?

Nintex RPA - How do I extract data from excel and enter that data in a website? The spreadsheet has one column. I need to move from row to row until all the numbers have been used. Once the number is in the data field on the website, I then need to run a process and go back to excel and get the number out of the next row. have been trying to use ‘get worksheet’ and ‘copy from excel’, but I don’t think I am on the right track.

I have a wizard that uses the chrome browser. When I have finished all the tasks within, the wizard signs out of the application and needs to close the browser window. How can I do that, please? It could be in the documentation but I don’t know what to look for. The windows ALT + F4 is what I am using now but I don’t know how to hold the ALT while the F4 is entered. I am sure it is something simple but I am still new at this :)

A vendor sends us files daily, Monday through Friday, for processing. We have an automation that processes the file and runs it through our systems. Until it is fully implemented we have to manually change the ‘current date’ in that automation to the last processing date. Is there a way to have the system set the date to the last processing date when the file processed on Monday should use Friday’s date, and Tuesday through Friday’s files will have the previous date (unless there is a holiday)?

I need to delete the contents on a defined Excel worksheet. I am using the ‘delete from excel’ command but it has quit working. I have tried several options but nothing seems to be working. The data is in column A beginning at the first row. I tried using the ‘range’ [A1:ZZ100]; the ‘from’ column A row 1 to column A row [blank]; then changed up the ‘from’ to column 1 row 1 to column 1 row [blank]; and finally the ‘entire worksheet’. Nothing is working. I can delete the sheet values manually but the following day it will pick up where it left off. I am sure to be missing something simple….

I am trying to create a wizard to log in to a site but when I try to set up the command ‘insert username into active field’ I get an error message. Do you know what I could be doing wrong? For Step 1, the process of launching the website is working. The cursor is positioned in the User ID field. For Step 2, I try to drop the insert username command and choose the specific user for the site, but I get an error message: The following commands are not supported at this position and will be removed: Insert username into active field.

After a restart on the server in which the system is installed, the robot with which the processes are run is in down status, and manual entry is needed to idle it.Until it takes on missed processes.Is there an option that the robot will be connect automatically and will not wait for someone to do it?

Why are some commands not supported at certain positions within a wizard? Is there a set of guidelines that outline what commands can’t be used at which position and for what reason? Trying to build a wizard and inserted an Advance Command to check if an UI object exists but getting the message to say its not supported at that position.

Hi, is there any problem for the login to kryon studio now? The login screen is blank..

Running into a stringent firewall policy to automate a process. Use hyperautomation to get around the wall…Read more here!

Does anyone know how to use Parameters field in Run Script command? If I have, say, a python code as in the picture, how do I pass “testInputVariable” into the code to be used as variable a of function testFunction?