RPA

FORUM POSTS AND DISCUSSIONS

  • 271 Topics
  • 695 Replies

271 Topics

E
Eli_ShteinbergNintex Employee
posted in RPA

Nintex RPA v21.10 and v22.3 End of Support extension

Dear customer,  We understand that you may need some extra time to upgrade to the latest version (23.11). Therefore, we are pleased to inform you that the end of support for RPA’s 21.10 and 22.3 version’s has been extended to September 2024. Regards,Nintex Product Team

0
E
2 months ago
C
CherylHRookie
published in RPA

Nintex RPA - Excel data to website

Nintex RPA - How do I extract data from excel and enter that data in a website?  The spreadsheet has one column.  I need to move from row to row until all the numbers have been used. Once the number is in the data field on the website, I then need to run a process and go back to excel and get the number out of the next row.  have been trying to use ‘get worksheet’ and ‘copy from excel’, but I don’t think I am on the right track.

181
Sasan
14 hours ago
C
CherylHRookie
asked in RPA

Insert Username into Active Field

I am trying to create a wizard to log in to a site but when I try to set up the command ‘insert username into active field’ I get an error message.  Do you know what I could be doing wrong?For Step 1, the process of launching the website is working.  The cursor is positioned in the User ID field.For Step 2, I try to drop the insert username command and choose the specific user for the site, but I get an error message:The following commands are not supported at this position and will be removed:  Insert username into active field.

15
L
8 days ago
P
PessylNovice
asked in RPA

Connect the bot automatically to the console after restart in server

After a restart on the server in which the system is installed, the robot with which the processes are run is in down status, and manual entry is needed to idle it.Until it takes on missed processes.Is there an option that the robot will be connect automatically and will not wait for someone to do it?

1
B
29 days ago
blackfantasy
blackfantasy
asked in RPA

Access denied when trying to get an email message from M365 using "Get email message DAC"

I faced an issue: “Access is denied. Check credentials and try again” when trying to get an email message from M365 using “Get email message DAC”.This issue happened with the latest version of Nintex RPA 23.11.1. When I tested it with version 22.9.3 with the same configuration as the latest version (Dynamic Command version is 22.9.03.05.23), no error was found, and the messages could be retrieved.The different between Dynamic Commands 23.11.0.1 with 22.9.03.05.23, no server field exists like on IMAP or POP3.Is there any way to solve the issue?FYI, I did followed the step by steps Working with M365 Exchange Modern Authentication configuration (https://help.nintex.com/en-US/kryonrpa/23.11/Content/Console/WorkingwithMicrosoft365ExchangeModernAuthentication/Azure_Configuration_for_Modern_Authentication.htm?tocpath=Studio%7CCredentials%20Vault%7CWorking%20with%20Microsoft%20365%20Exchange%20Modern%20Authentication%7C_____1)Appreciate if anyone could have any input or suggestion to solve thi

0
blackfantasy
1 month ago
D
dormanRookie
asked in RPA

Unsupport Commands at certain positions of a wizard

Why are some commands not supported at certain positions within a wizard? Is there a set of guidelines that outline what commands can’t be used at which position and for what reason? Trying to build a wizard and inserted an Advance Command to check if an UI object exists but getting the message to say its not supported at that position.

7
B
1 month ago
N
nelsonlai82
posted in RPA

Problem for the login to Kryon Studio

Hi, is there any problem for the login to kryon studio now? The login screen is blank..

4
T
1 month ago
Sasan
SasanNintex Employee
posted in RPA

Use hyperautomation to work around stringent firewalls

Running into a stringent firewall policy to automate a process.  Use hyperautomation to get around the wall…Read more here!

0
Sasan
1 month ago
A
Alisher SVRookie
asked in RPA

How to user Parameters field in Run Script command

Does anyone know how to use Parameters field in Run Script command? If I have, say, a python code as in the picture, how do I pass “testInputVariable” into the code to be used as variable a of function testFunction?

6
A
1 month ago
B
bsikesScout
asked in RPA

Fallback Confusion - Unattended Bot

Hoping someone can provide a bit of an explanation on why fallbacks act a certain way when a wizard is initiated via the API or (I assume) the Nintex Console.It seems that if, for example, an object fails to be detected and the fallback for that is set to raise an error, that an error isn’t actually raised. Instead, the wizard just fails and closes. I assumed that one of 2 things would happen, neither of which did. The wizard would pop up with a box indicating what it was trying to find, similar to the “Do It” version of running a wizard.  The wizard would move to the Wizard end unsuccessfully section, since it is apparently going to end with a fail, which seems to be an unsuccessful end. However, since neither of these option happen, I’m a bit unsure what the point of the default “raise error” fallback is when it comes to these unattended wizards.  Thanks!

10
B
1 month ago
J
JackEnrightRookie
asked in RPA

Open URL Link Not working on my Link

I have an advanced cmd to open a specific URL link in the default browser (msedge.exe). This advanced cmd had been working normally but in the last two weeks when ran the cmd just won’t open edge at all. The specific URL is in my list of applications and had been working previously. If I use any other website like  “Google.com” the “open url link” cmd works just fine.  Any idea why it would just stop opening the URL?

2
J
1 month ago
S
SuprianajRookie
asked in RPA

Test Management Software Tool

Hello Community & Support,I'm looking for a test management software tool to store and organize our test cases. Currently, we're using the Nintex RPA LE for automation testing. We've scripted the RPA to perform regression testing by fetching test cases from our SQL Server and updating their status to complete upon finishing. I'm wondering if there's a test management software tool compatible with Nintex that can directly update test case statuses and load test cases from the management software itself, rather than relying on a SQL Server.

0
S
2 months ago
K
Kraftwerk87Rookie
asked in RPA

Nintex RPA Developer Learning Path

Hello there, I am just getting started several certification path, Nintex RPA Developer being the first of them. During the first videos I got the feeling that that servers are cloud based, however, after installing Nintex RPA Studio 23.11.1.7 I get the same error each time I try to open it, “Cannot access Nintex Servers”. What am I missing? Do I need to install my own server service? The information regarding these setups is very sparse. My username is Kraftwerk87 (vrc@nextret.net) Could I get access to the community and maybe an advice or two about how to tackle these issues and the mentioned Learning Path? Thanks in advance.

8
K
2 months ago
Sasan
SasanNintex Employee
posted in RPA

Use the power of hyperautomation to provide a seamless end-to-end solution

A recent hyperautomation solution successfully applied automation to ensure accurate, efficient, and compliant data entry into third party websites… Read more here!

0
Sasan
2 months ago
K
kwstroudRookie
asked in RPA

Migrating from Nintex RPA LE to Nintex RPA - Fiserv user

I am a long time user of Nintex RPA LE (Foxtrot) who is looking for other users who are migrating to Nintex RPA that are also users of Fiserv Premier (Navigator).  I have recently had some success figuring out how to handle some of Fiserv’s nuances with the help of Professional Services, but I would love to have a Fiserv peer or peers to discuss some best practices.One thing I’m struggling with is if you are working a list from Excel, and you run into an error after you have already completed several items using the loop, how do you restart where you left off?  One way I’m planning to incorporate is to have all the data in a SQL table, pull in the first item available in a “Ready” status, immediately mark it as “In Process”, and then mark it as “Complete” once the process is complete.  The next time through will get the next item available in “Ready” status as the prior one is now marked as “Complete”.  The issue is that several users are hesitant to use a SQL source, and prefer to imp

5
B
3 months ago
S
SKiranNovice
asked in RPA

Get a file from Sharepoint and upload using a Call web service

Hi, I am trying to upload a file using REST API. I have used the “Get a file” action to fetch the file from Sharepoint Online. My next action is Integration - Call a web service to upload the file. Usually for web request, I would have inserted the file inside the request content/body. However, Nintex is not allowing to add the file which I saved as a variable in the request content.Any idea how I can include the file in the web request please. Get a file save the output in a variable names varObjOutputFile2 with type File. I am trying to insert the File on the request content but it’s not allowing me to do that.

0
S
3 months ago
A
Ahmed_TangaRookie
asked in RPA

New Developer

Hay every one.I have an question, I try to be RPA Developer with Nintex RPA Technology but I faced problem that the course explain with Kryon Studio and I can’t find it.which tool can I use it to practice with nintex?where can I find it with direct link to download and go on?thanks for help.

14
fguaragna
4 months ago
B
bsikesScout
asked in RPA

Odd Global Variable Behavior

Hello,I’m not sure if I’m misunderstanding how Global Variables work, or if this is a bug. Yesterday I setup a wizard to use the Set Global Variable command to create a global variable (Odd that there’s not an interface to work with global variables outside of a wizard).  Then, I changed that action to a Get Global Variable action, and was able to successfully retrieve that variables value and use it in a Wizard.  Today, If I use the Get Global Variable action, the global variable I created yesterday is no longer an option to choose from. I assumed that Global Variables were essentially permanent, but It seems like it was deleted at some point. Does anyone know if this is how Global Variables are supposed to work?Thank you​​​​​!

6
B
4 months ago
E
Eli_ShteinbergNintex Employee
posted in RPA

The new RPA System Manager is now available for General Availability

The new RPA System Manager drastically improves the Installation experience for you. To familiarize yourself with the RPA System Manager, you will find several links for installation assets, ‘How to’ documentation, and a new installation course below.Help doc link. University course link. Nintex Customer Central link. The new system manager will also provide access to the RPA v23.11 General Availability releasev23.11 includes:New installation experience via the System Manager New Email DACs Now supporting Microsoft Graph API New Variables DACs New External data DACs New SAP DACs Now support forward compatibility for DACs The initial step of cross-platform supportImprovements and fixes Create an Oracle Database trigger Email commands improvement 'Add automation task to queue' command enhancementImproved quality and stability Bug fixes and more product performance improvementsIf you have any questions, please don't hesitate to contact the product team.We will be happy to help.

0
E
4 months ago
B
bsikesScout
asked in RPA

What is the best way to iterate through a data file (CSV)?

We’re still in the process of migrating from Nintex RPA LE to Nintex RPA, and one of the features we’re severely missing is how easy RPA LE handled the import of data. With RPA LE, you could have it import a data file (like a CSV), and it would automatically populate a “Data” section with all of the available headers in the file.  You could then loop through that data, and easily reference a property from the current iteration.  With Nintex RPA, this process seems MUCH more cumbersome. It seems like you need to import the file as text into a variable, then iterate through that variable with a specified row delimiter. To pull out a specific property of the current row, you need to get that index of the needed column using a column delimiter, and hope the layout of the file doesn’t change. I know that I could set it up at the beginning of the loop to pull out each index of the row into a named property - it’s just a lot of work that we didn’t have to do with the legacy product.  So, for

3
K
4 months ago
C
cgatesRookie
asked in RPA

Set Details of a target to a variable

Is there a way to set the Details, specifically the Element ID of a target to a variable.For example, we have a webform where the Element IDs often change because of text in the Header that comes before the first form field. If we could capture the first ID, we could target using a variable that increments from there to target the rest of the form dynamically. Get info only provides the URL. 

2
C
5 months ago
B
brandonMMRookie
asked in RPA

Validating License key problem

Nevermind.

0
B
5 months ago
Lauren_R
Lauren_RNintex Employee
asked in RPA

Help creating a cron expression

Hi!I am playing about with custom time triggers, and I have read the "A Guide to Cron Expressions” webpage linked in both the console and nintex help pages. I have created a cron expression, but I keep getting nothing in the schedule... any tips on where I have gone wrong? I want the bot to run every 15 minutes between 2am to 4am every day.. pics of expression and then empty schedule below...When I use a cron expression editor to double check it says I am using special characters that may not be recognised by everything, but I thought I had followed the linked guide - it’s not working though..Any help would be appreciated! 

3
Lauren_R
6 months ago
E
Eli_ShteinbergNintex Employee
posted in RPA

Now Available: The new RPA System Manager is now available for Advanced Preview

The new RPA System Manager drastically improves the Installation experience for you. To familiarize yourself with the RPA System Manager, you will find several links for installation assets, ‘How to’ documentation, and a new installation course below.Help doc link. University course link. Nintex Customer Central link.The new system manager will also provide access to the RPA v23.11 advanced preview release v23.11 includes:New installation experience via the System Manager New Email DACs Now supporting Microsoft Graph API New Variables DACs New External data DACs New SAP DACs Now support forward compatibility for DACs The initial step of cross-platform supportImprovements and fixes Proxy Triggers - support for internal LB (for the HA use case) Create an Oracle Database trigger Email commands improvementImproved quality and stability Bugs: 30 customers bugs, and 150 internal bugs have been fixed. Vulnerabilities: moved fully to.NET6 Scope of regression and automation coverage: 90%.

0
E
6 months ago
G
galabertsteinRookie
asked in RPA

Kryon encountered an unexpected error and will close

Hello!After installing "Kryon Assistant" the application does not start.Error: in the window: "Kryon encountered an unexpected error and will close".This error occurs in Windows 7 (x32, x64), Windows 8How to solve the problem?

4
G
6 months ago

View our Community Site Map

Nintex Community Sitemap

Badges

Show all badges
Terms & ConditionsCookie settings