Archive

Apologies if this isn't strictly a Nintex issue:I would like to display the 'Assigned To' field (from the 'Workflow Tasks' list in SharePoint) in the list view of the list and workflow I've built.Unfortunately, I can't figure out a way of targeting the 'Assigned To' field by filtering by list item (such as using 'Title' to narrow it down).Does anyone have any ideas on best practice? Or is this just not possible?Thanks

I am working on a project where we will have three levels: collector, manager and senior manager. A task or status change will take place on an item if the person did not answer the task. The task will go to the next level up meaning, if the collector doesn’t answer the task or make some kind of status change it goes to the manager,etc. This takes place after the 24 hours, however this task or status change should only happen on business days. Weekends and holidays should not be accounted for. What is the best way to do this?

Hi!I try to save a form and redirect it to another page.The save button is hidden with css ( .saveButton {visibility: hidden;}) and I use a javascript button to fire the function.The redirection is working, but the list item isnt saved.(I dont use the built in redirect as I would like to extend the function with else if logic and different links)This is the code:function saveAndRedirect() {  NWF$('.saveButton').click();  window.location.replace('https://www.google.com');}I added a "test" code to the hidden save button client click if it is clicked or not by the function and it is clicked as the alert is popping up correctly!Client click: NWF$(document).ready(function(){alert('Save Clicked');});My conclusion is that the code is good so far as the function is clicking the save button and the page is redirected, BUT why it is not saved to the list? Is there an additional code to actually save the item?

hi All,may i know how can i select a different tab when i click on a button (client click).example, in my form i got 3 tabs (Tab A, Tab B and Tab C).in Tab A, if i click on 'Next' button, i want to go to Tab B.thanks

Hi all, its been few days that i am receiving the below error message, we hadnt this issue since we using this Workflow and all of the sudden it start happening, Regards  The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Access Denied

Hi everyone, I need help from you. I'm working with Nintex for SharePoint 365 and I need to create some columns in my Tasks list, since I'm able to use these new columns, only the standard columns are appearing

I have a simple form. There is a drop down that contains 2 values - New (default) and Assigned. I have a workflow that records when the value is changed to Assigned and a report that captures when a form is created and that timestamp.    My question is if a user creates the form and ALSO changes the value to Assigned the timestamp shows that the value was changed 1 second before the form was created. This is throwing off the report. Is there any way around this?  If there is no way around this, does anyone have an idea how I can modify the excel formula to not error out.... :smileylol:

Why my css is not applied to the nintex form when opened in IE but whereas it is applied to it when opened in chrome?.Can anyone help me with this issue.

There is custom branding solution applied to our SharePoint 2013 on-prem site. When I create a Nintex form, the button controls in Nintex doesn't visible completely (please see below screenshot 1). I tried to modify custom solution CSS and this seems to resolve the Nintex button issue but it is causing OOTB SharePoint button controls to appear small (please see screenshot 2). Screenshot 1:    Screenshot 2: Below is the CSS class which I have added to Custom solution (ref: Screenshot 2): nf-filler-control-inner, input[type=button], input[type=submit], input[type=reset]{padding-left:1em !important;padding-right:1em !important;padding-top: 0em !important;padding-bottom:0em !important;margin: 0 0 0 0 !important;}

Hello everyone,    I have a Nintex form with the following fields: In Prior Date & Time Relieved: the first control is the standard datepicker and the remaining two are choice controls for hours (0-23) and minutes (0-59). The same thing applies for Date & Time: Time on Duty.    Is there a way I can concatenate the date, hours and minutes values for both the highlighted fields to represent a date with hours and minutes (for eg: 07/16/2019 03:49)? If yes, can I subtract these values to show the difference in hours and minutes? The requirement is to subtract Prior Date & Time Relieved from Date & Time: Time on Duty as follows: if Prior Date & Time = 07/16/2019 15:00 and Date & Time: Time on Duty = 07/16/2019 16:00, the calculated value should show 01:00.   I know we can subtract dates using 'datediffHours' and 'datediffMinutes' inline functions with the standard datetime picker control, but it only supports 5 minutes increments and I need 1 minute time increment. 

I have designed form for Content Type using Nintex forms and now want to deploy that using powershell. Its possibe to deploy Nintex list form using powershell but how can I deploy content type form using powershell?

This allows a call to get an auth token from Office 365 on behalf of an application account. K2 supports using a bearer token provided via OAuth 2 - if you configure any Office 365 service instances to use that OAuth flow then you will not require this swagger file.  

Hello Experts, We have created a Nintex Form and wanted to replace the Nintex default banner with a different one. But nothing is working and size is not adjusting to it. Please help. Regards...

Hi: I have a library with a 45, 30 and 15 day countdown (with email reminders) to a "review due date" workflow. I made changes to same workflow and the 3 email templates. Everything is fine with new instances, but if a workflow was paused and ready to send out a 15 day reminder email, Nintex sends the original template and the new template. (I can tell by the old vs new font.) How do I cancel in process old email templates and make sure the new template is used? Thanks-

Hi there:I'm getting this error for every file I try, on every NWC form I have -- PDFs, XLSX, PNG, 1KB, 1MB... all:Here's the set-up:The attachment is intended to be going into a connected OneDrive:Thanks for any help you can offer!PS: (for bonus points.......) ... is there a way to attach an uploaded file to a SharePoint item, or put it into a SharePoint library? I can not for the life of me see where to do that.Cheers!rhia

i want to send reminders in different dates, first 24 months , then 12 month, then 6 month, 2,3, 1. This a a system for long term lease agreement , to reminders users before expiry date.

Hello Community,   I'm workingwith Nintex workflow for SharePoint and I need to be able to count the number of decimal places in a document's version value and save that to a variable.  IOW, sometimes, with SharePoint versioning, a document can have a version number of 10.1, or 10.12, or 10.123, etc. The value of the version is set in the field "Version", so I can get the value, but then I need to be able to count the number of spaces, for example 10.1 has 1 space, 10.12 has 2 spaces, 10.123 has 3 spaces, etc.   Has anyone else ever done this?  If so please provide guidance and examples.   Thanks!   Tom

We have Nintex Workflow v4.1.0.0 for SharePoint 2016 on premise. Today, I downloaded and imported a trial key for Nintex Forms v4.1.0.0. When I go to activate ‘Nintex Forms Prerequisites Feature’ at the Site Collection level, I am getting the following error ‘No license file has been found for Nintex Forms’.   Any ideas on how to get past this issue?

Hi all, We’ve recently run into an issue where the form will fail to open in edit mode if a user leaves and they had their name entered within a person or group field inside the Nintex form – this makes it impossible to edit forms assigned to previous users - it can be done through quick edit in sharepoint if fields are connected, but they aren't always connected and this seems like a terrible workaround. The form can be opened in view mode but not edit mode. The sole issue seems to be around the People or group field containing a user that has left the company, not a permissions issue. Does anyone have a solution or best practice to avoid this occurring in the future?

HiI have a list with 2 content types.I created a Nintex form for the first, default type.This form works as expected. I can create an item and edit the item.I verified that before adding any workflows to the list. Namely, after the form data is submitted, a workflow starts and changes the item to the second content type.Note. To verify correctness of the first form I used "Start manually" because I wanted to confirm that the item is editable in the first Nintex form.After completing workflow, I see that the item has the second content type as expected.Next, I created a Nintex form for the second content type.It has new fields, some calculated fields.I verified this form in Nintex From Designer both in Display and Edit mode. As expectedIssueWhen I open the item that I created earlier in View mode, I see values entered in the frst form  for the first content type. As expected.HOWEVER,when I switch to Edit mode (or select Edit from ECB), the form that opens is out of the box SharePoint fo

Calculated fields with even simple calculations are not functioning in Nintex forms. Strange thing is, they work on some forms on other lists. I have one list with different Contentypes ( different forms based on different content type) - they don't work on this.All my lists allows Management of Content Type. On 2 forms with different lists they work . but others which have similar configuration doesn't work. I created all lists based on list templates I saved .On some they work and on some they don't . Couldn't figure out from many days. Any pointers would be appreciated.

Hi there Experts!   Do we still need to setup DEV,QA/Staging and Production Environment? Right now we are thinking to only use QA/Staging then Production Environment as there are a lot of works to do on moving changes from one environment to another. We have been started to define development standard for Nintex Workflow Development and strugling what to decide.   Need your recommendation on this and need some insights on how youve done this on your teams.   Thanks!  

I'm new for nintex form. I tried to build a form using Classic Forms Designer and i need to underlined the columns to separate one to another. How do i underline or separate each field in the form. 

Hello,Is there a way to create user accounts in Azure Active Directory using Nintex Workflow 2013 (perhaps with the Web Request workflow action)? If yes, could you please tell me the details how to achieve it?

i have customized the nintex form in flexi task and published,but when i clicked the approval link its showing diffrent form with diffrent set of fields which is not related to the approval form...any idea ??