IMPORTANT:

If you perform a reconfigure without reinstalling the fix pack, users will not be able to log into Nintex Automation Designer/Manager/Workspace/Runtime after the reconfigure completes and the below error will occur:

“HTTP Error 500.19 - Internal Server Error”

Prerequisites and Dependencies

The Fix Packs are only compatible with Nintex Automation (5.7) products. Because Fix Packs are cumulative, each new Fix Pack contains the updates and fixes that were included with the previous Fix Pack releases. Nintex Automation (5.7) must be installed first after which the latest Fix Pack must be installed. To determine which cumulative update or fix pack has previously been installed in your environment see https://help.k2.com/kb000426.

Installing the Fix Pack

To install the Fix Pack, run the Fix Pack installer on every machine in your environment where a Nintex Automation product or component is installed, including desktop machines that have Nintex Automation Studio or Nintex Automation Designer for Visual Studio installed. The same installer is used to update the specific Nintex Automation products and components that are installed on that machine.

• Backup your Nintex Automation database.
• Download the Nintex Automation (5.7) Fix Pack.exe.
• Double click the .exe file and select a location to extract the installation files.
• The Update window opens. Click Change if you need to change the Nintex Automation database. Select the correct information and click Accept. Click Update to start the installation.

  

   

• A warning is displayed if a backup of the Nintex Automation database is not found. Create a backup before selecting OK. Click OK on the warning window to continue with the update. Click Cancel if you want to create a backup first.
• After creating the backup, you can click Update again on the Install window. If a backup for the Nintex Automation database was recently performed, the installer shows you the date and time of the last backup.
• Click OK to continue with the update.
• Wait for the update to complete, and then click Finish.
• If you need to view the installation log file, open it from the link at the bottom of the Update window or you can locate the InstallerTraceadate].log file in the %temp%K2 Setup Log folder.

Rollback Instructions

• To roll back the Nintex Automation (5.7) Fix Packs, uninstall Nintex Automation from your environment.
• Re-install Nintex Automation Five (5.7).
• Re-install the Fix Pack you had installed prior to this rollback.
• Delete the database created when you re-installed it.
• Restore the Nintex Automation database using the backup made before the update.

You can also restore the Nintex Automation database before re-installing Nintex Automation. When you re-install, you can just point to the restored Nintex Automation database.

Considerations

If you had K2 4.7 installed before any of the Nintex Automation versions, and you make use of the client tools that was installed with K2 4.7, you need to start the re-install with K2 4.7 before you can re-install the Nintex Automation Five version.

Fix Pack 1

This fix pack includes the following fixes:

1. Code Fix: An error occurs when closing the K2 Workflow Designer
2. Code Fix: Task Notification emails stop sending intermittently
3. Code Fix: The same user can be added multiple times to a role
4. Code Fix: Edit buttons not responding on the SharePoint Application page
5. Code Fix: Workflow events not executing after deploying a package
6. Code Fix: Unable to sync user from K2 ADFS Provider
7. Code Fix: Unable to create a Workflow using SharePoint as a non-admin user
8. Code Fix: Workflow events are not starting
9. Code Fix: The ‘Back to Site’ Button is displaying incorrectly
10. Code Fix: Unable to deploy multiple Workflows after upgrading
11. Code Fix: Using MS Graph Provider to sync from Azure Active Directory does not work as expected

Fix Pack 2

This fix pack includes the following fixes:

1. Code Fix: Database not clearing subscription values when executing the Unsubscribe List
2. Code Fix: Workflow Schedules stop working
3. Enhancement: Daily check for License Key expiration
4. Code Fix: UMUser SmartObject does not work as expected with Picker Controls
5. Code Fix: Error occurs when running the Nintex Automation for SharePoint (SPFx) Registration Wizard
6. Code Fix: Unable to create or edit Views
7. Code Fix: High Virtual Memory usage in the K2 Server process
8. Code Fix: XSS vulnerability occurs before logging into K2

Fix Pack 3

This fix pack includes the following fixes:

1. Code Fix: Error occurs when uploading a file
2. Code Fix: OData API returns an error but redirects the task successfully
3. Code Fix: Unable to create or edit Views or Forms
4. Code Fix: Style Profiles not working as expected

Fix Pack 4

This fix pack includes the following fixes:

1. Code Fix: On-Hover mouse icon changed after upgrading
2. Code Fix: Hiding a label or data label control does not work as expected
3. Code Fix: Task and Email Recipient field disappears after deploying a Workflow

Fix Pack 5

This fix pack includes the following fixes:

1. Code Fix: Unable to log into K2 using the Windows Security Token Service
2. Code Fix: Local timestamp not showing in the Workflow Designer panel
3. Code Fix: Incorrect checkbox colour showing after upgrading
4. Code Fix: Error intermittently occurs when opening ViewFlow
5. Code Fix: SmartObject configuration via SmartFields is not working as expected

Fix Pack 6

This fix pack includes the following fixes:

1. Code Fix: Context Browser does not display SmartObject Methods correctly after upgrading
2. Code Fix: Radio button list controls don’t display correctly on Mobile
3. Code Fix: RadioButtons and Checkboxes disappearing from SmartForms

Fix Pack 7

This fix pack includes the following fixes:

1. Code Fix: Unable to see the K2 Smartform binding on a User Task Event
2. Code Fix: Slider Control does not work as expected when using large values
3. .Code Fix: Refreshing a SmartForm with keyboard shortcuts does not work as expected with tabbed forms
4. Code Fix: Internal Browser IP Address is disclosed in an error message
5. Code Fix: Configuring SmartObjects via SmartFields does not work as expected
6. Code Fix: Popup message appears when adding or editing a domain in Management
7. Code Fix: Unable to configure K2 SmartObject properties in K2 Workflow
8. Code Fix: List filter not working as expected

Fix Pack 8

This fix pack includes the following fixes:

1. Code Fix: Error occurs when packages containing SharePoint Online objects are deployed

Fix Pack 9

This fix pack includes the following fixes:

1. Code Fix: Workflow SmartObject not mapping correctly
2. Code Fix: Autocomplete control highlight doesn’t work as expected after upgrading

Fix Pack 10

This fix pack includes the following fixes:

1. Code Fix: Czech and Slavic Language Pack not working as expected for Nintex Automation for SharePoint App (SPFx)

Fix Pack 11

This fix pack includes the following fixes:

1. Code Fix: SmartObject Workflow Error Handling not working as expected
2. Code Fix: Unable to log in using Azure Active Directory (AAD) credentials
3. Code Fix: K2 Five becomes unresponsive
4. Code Fix: Get List Methods didn't adhere to Advanced Filters

Fix Pack 12

This fix pack includes the following fixes:

1. Code Fix: Error occurs when creating a new instance of Workflow
2. Code Fix: Converting SmartObject filters not working as expected
3. Code Fix: Checkbox exceptions incorrectly configured for SmartWizards
4. Code Fix: Loop step in Workflow designer is not working as expected
5. Code Fix: Incorrect mail recipient address used in Workflow mail event
6. Code Fix: Checkboxes not appearing in the Management site

Fix Pack 13

This fix pack includes the following fixes:

1. Code Fix: Mail Events with attachments not working as expected
2. Code Fix: Popups not working as expected for Style Profile Designer
3. Code Fix: Task notifications get stuck in the drafts folder
4. Code Fix: Workflow SmartForm Input Mappings not configuring as expected
5. Code Fix: Nintex Automation (5.7) Help buttons incorrectly point to K2 Five (5.6) documentation
6. Code Fix: Sending an email with duplicate attachments does not work as expected
7. Code Fix: Closing an existing Workflow does not work as expected
8. Code Fix: Workflow references do not update as expected

Fix Pack 14

This fix pack includes the following fixes:

1. Code Fix: Error intermittently occurs when opening ViewFlow
2. Code Fix: Changes made to Azure Active Directory do not reflect as expected
3. Code Fix: SmartForms stop responding when changing the appSettings useBundledFiles to true

Fix Pack 15

This fix pack includes the following fixes:

1. Code Fix: Picker Controls and Search Bars have a break in their outline
2. Code Fix: Images not uploading correctly using Attachment Control
3. Code Fix: Using ‘Save As’ to save a Workflow in a Category does not work as expected

Fix Pack 16

This fix pack includes the following fixes:

1. Code Fix: K2 Server stops responding
2. Code Fix: Intermittent SQL error occurs when upgrading
3. Code Fix: XSS Scripts Executing in List View
4. Code Fix: Property Mappings Lost After Workflow Deployment

Fix Pack 17

This fix pack includes the following fixes:

1. Code Fix: Sync Identity filter returns no results
2. Code Fix: Auto Complete Control not working as expected
3. Enhancement: Active Directory Broker filtering options added

Fix Pack 18

This fix pack includes the following fixes:

1. Code Fix: SmartObject Create Method not working as expected
2. Code Fix: Error occurs when filtering Get User Method with Empty String in AD Service2
3. Code Fix: Pagination fails after clearing List View Filter
4. Code Fix: Inconsistent category naming for Document Set SmartObjects during deployment

Fix Pack 19

This fix pack includes the following fixes:

1. Code Fix: Prevent XSS Property on data label not working as expected

Fix Pack 20

This fix pack includes the following fixes:

1. Enhancement: Registering an OData Service does not work as expected
2. Code Fix: Out-of-Office Exception Rule Ignored After Editing Worklist in SmartForms