Nintex Automation Cumulative Updates and Fix Packs

CUMULATIVE UPDATES AND FIX PACKS | Nintex Automation and K2 blackpearl

  • 364 Topics
  • 6 Replies

364 Topics

K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Autocomplete control highlight doesn’t work as expected after upgrading

Issue DescriptionWhen you upgrade from K2 Five (5.6) to Nintex Automation (5.7) and then hover your cursor over a value for selection in the autocomplete control, the value does not highlight as expected.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 09.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
1 day ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Workflow SmartObject not mapping correctly

Issue DescriptionWhen you map the results of a SmartObject call to Workflow variables, the configuration does not persist if you move to a different step. When you click on the SmartObject step again, the Add button is disabled and the previous configuration has been removed.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 09.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page.

0
K
1 day ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Task notifications get stuck in the drafts folder

Issue DescriptionTask Notifications are getting stuck in the drafts folder in Microsoft Exchange intermittently, an error then occurs in the host server log.Error Message:The following error occurs in the host server log:“SourceCode.MessageBus.EwsDestination: Email Send Falied, Error: Microsoft.Exchange.WebServices.Data.ServiceResponseException: The operation can't be performed because the item is out of date. Reload the item and try again”ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 36.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.ConsiderationsAfter applying this Fix Pack, you will need to apply the below for the fix to take effect:Open the ConnectionStringEditor.exe located in [Install folder]\Host Server\Bin\ Change the SaveEmail value for SourceCode.Mes

0
K
17 days ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Slider Control does not work when set to Visible option via Form properties action

Issue DescriptionWhen you set a Slider Control to Visible option via Form properties action on the Form Initialized Rule, the Slider Control does not work as expected.ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 36.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
17 days ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

K2 Five (5.6) Fix Pack Release Dates

Note:The Release Notes for K2 Five (5.6) can be found (here).For any further information, please Contact Support Please see below the Fix Pack release dates for K2 Five (5.6): Fix Pack Release Date Download Link Fix Pack 1 2 September 2022 Contact Support for this Fix Pack Fix Pack 2 16 September 2022 Contact Support for this Fix Pack Fix Pack 3 23 September 2022 Contact Support for this Fix Pack Fix Pack 4 29 September 2022 Contact Support for this Fix Pack Fix Pack 5 4 October 2022 Contact Support for this Fix Pack Fix Pack 6 7 October 2022 Contact Support for this Fix Pack Fix Pack 7 19 October 2022 Contact Support for this Fix Pack Fix Pack 8 29 November 2022 Contact Support for this Fix Pack Fix Pack 9 6 December 2022 Contact Support for this Fix Pack F

0
K
17 days ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Email steps in a Workflow don’t display correctly after deploying

Issue DescriptionWhen you deploy any Workflow package and then deploy it again, the Email steps in the Workflow don’t display correctly.ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 35.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page.

0
K
1 month ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Task list does not work as expected

Issue DescriptionWhen you navigate to the task list in Management and search for activities, no activities are returned.ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 35.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
1 month ago
K
KerynRNintex Employee
published in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: List filter not working as expectedCode Fix

Issue DescriptionWhen you fetch multiple values from an associated table, the quick search only displays data from the first column. Additionally, when a List View is generated from a table SmartObject with a foreign key, the foreign key column gets generated as a list display control. If you add a second list display control column to using the foreign key, the columns will both appear with the same name in the quick search drop-down.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 07.Ensure you have installed the correct K2 version and/or Cumulative update. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links above for the required version. Install the Fix Pack to apply the fix.

370
K
1 month ago
K
KerynRNintex Employee
published in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Configuring SmartObjects via SmartFields does not work as expectedCode Fix

Issue DescriptionWhen you configure a SmartObject with a filter panel on a custom option, the SmartField is blank, and a JavaScript error occurs.Error MessageThe following error occurs: ERROR TypeError: Cannot read properties of undefined (reading 'systemName')ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 07.Ensure you have installed the correct K2 version and/or Cumulative update. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links above for the required version. Install the Fix Pack to apply the fix.

160
K
1 month ago
K
KerynRNintex Employee
published in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Popup message appears when adding or editing a domain in ManagementCode Fix

Issue DescriptionWhen you add or edit a domain in Management, a popup with the following message occursThe ADConnectionString must be modified in the K2 Workspace web.config to reflect the changes made to the domains.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 07.Ensure you have installed the correct K2 version and/or Cumulative update. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links above for the required version. Install the Fix Pack to apply the fix.

330
K
1 month ago
K
KerynRNintex Employee
published in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Internal Browser IP Address is disclosed in an error messageCode Fix

Issue DescriptionWhen you get an error message on Runtime, your IP address is disclosed in the message.ResolutionThe fix is available in:K2 Five (5.4) March 2022 Cumulative Update Fix Pack 23. K2 Five (5.5) March 2022 Cumulative Update Fix Pack 35. Nintex Automation (5.7) Fix Pack 07.Ensure you have installed the correct K2 version and/or Cumulative update. Refer to KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links above for the required version. Install the Fix Pack to apply the fix. It is recommended to clear the browser cache and refresh the page.

320
K
1 month ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Word wrap on Task, Escalation and Send email events does not work as expected

Issue DescriptionWhen you upgrade to K2 Five (5.6) Fix Pack 30, the email body fields in Task emails, Escalation emails, and Send email events do not have word wrap causing the text to appear as a single line instead of multiple lines. ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 34.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.  

0
K
1 month ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Refreshing a SmartForm with keyboard shortcuts does not work as expected with tabbed forms

Issue DescriptionWhen you use tab controls on a SmartForm in Runtime and then attempt to use a keyboard shortcut to refresh the page (such as CTRL + R or F5), then the refresh does not happen unless you first click elsewhere on the page.ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 34. Nintex Automation (5.7) Fix Pack 07.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
1 month ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Slider Control does not work as expected when using large values

Issue DescriptionWhen you set the Slider Control minimum and maximum values using the Set Control Properties to very large numbers or use Transfer Data to set the Slider Controls value, the Slider Control stops responding.Error Message:The following error occurs when the Slider Control stops responding: “Something went wrong while displaying this webpage” ResolutionThe fix is available in:K2 Five (5.5) March 2022 Cumulative Update Fix Pack 34. Nintex Automation (5.7) Fix Pack 07.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Radio Buttons and Checkboxes disappearing from SmartForms

Issue DescriptionWhen you have a SmartForm with a View Control ‘Choice’, with a display type ‘Radio Button List’ and Checkbox ‘Allow Own Value’, they disappear from the SmartForm.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 06.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Radio button list controls don’t display correctly on Mobile

Issue DescriptionWhen you open a Form via a link, the Radio button list text is not aligned correctly.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 06.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Context Browser does not display SmartObject Methods correctly after upgrading

Issue DescriptionWhen you upgrade from K2 Five (5.6) to Nintex Automation (5.7) Fix Pack 03, the Designers Context Browser does not display/restore some of the SmartObject Methods correctly.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 06.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: SmartObject configuration via SmartFields is not working as expected

Issue DescriptionWhen you have a file or image type SmartObject property as the first property of a SmartObject and it is dropped into a textbox on the Configuration Panel, JavaScript errors occur and you are unable to continue.Error Message:The following JavaScript errors occur: Error 1: “TypeError: Cannot read properties of null (reading 'type')”Error 2: “TypeError: Cannot read properties of null (reading 'systemName') - there will be multiples of this one. You will have to close your browsers otherwise it will eat memory.”ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Local timestamp not showing in the Workflow Designer panel

Issue DescriptionWhen you upgrade to Nintex Automation (5.7), the timestamp in the Designer panel for Workflows shows in UTC and not the local server time.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Incorrect checkbox colour showing after upgrading

Issue DescriptionWhen you upgrade to Nintex Automation (5.7), the checkbox on the header of a View added to a Form using Style Profile shows the incorrect background colour for the checkbox control.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Working Hours Exception not working as expected

Issue DescriptionWhen you open a Working Hours Exception in K2 Management, the times are incorrectly displayed as PM instead of AM.ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 33.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Sync Identity filter returns no results

Issue DescriptionWhen you have the Sync Identity filter enabled and you select a recipient that should be returned by the filter, an error will occur.Error Message:The following error occurs: “"Error","General","0","ErrorMessage","SourceCode.Workflow.Common.SmtpMail: ","0 At least one recipient isn't valid. A message can't be sent because it contains no recipients."”ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 33.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
2 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Incorrect checkbox colour showing after upgrading

Issue DescriptionWhen you upgrade to Nintex Automation (5.7), the checkbox on the header of a View added to a Form using Style Profile shows the incorrect background colour for the checkbox control.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.

0
K
3 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Local timestamp not showing in the Workflow Designer panel

Issue DescriptionWhen you upgrade to Nintex Automation (5.7), the timestamp in the Designer panel for Workflows shows in UTC and not the local server time.ResolutionThe fix is available in:Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix. It is recommended to clear browser cache and refresh the page

0
K
3 months ago
K
KerynRNintex Employee
posted in Nintex Automation Cumulative Updates and Fix Packs

Code Fix: Unable to log into K2 using the Windows Security Token Service

Issue DescriptionWhen you log into K2 using the Windows Security Token Service (STS), the user cannot log in and an error occurs.Error Message:The following error occurs: “The server is not operational” ResolutionThe fix is available in:K2 Five (5.6) Fix Pack 32. Nintex Automation (5.7) Fix Pack 05.Ensure you have the correct K2 version and/or Cumulative update installed. See KB001893 to see what Fix Pack level you have installed. Download the latest Fix Pack using the links in the table above for the version you require. Install the Fix Pack to apply the fix.ConsiderationsThe below config setting must be made in order for the Fix Pack to take effect": <add key="StaticFallbackDomain" value="K2Test" />where the specific AD controller should be specified in the value attribute to be used as the fallback 

0
K
3 months ago

View our Community Site Map

Nintex Community Sitemap

Badges

  • First reply
    Tannichas earned the badge First reply
  • First Topic
    fortyonehas earned the badge First Topic
  • First Topic
    akshaysudhas earned the badge First Topic
  • First reply
    hertihas earned the badge First reply
  • First reply
    laur913has earned the badge First reply
Show all badges
Terms & ConditionsCookie settings